CENTURION · Roll-Up Automation

Centurion RDO II Roll-Up Garage Door Motor

A compact 24V DC roll-up garage door operator with battery-driven operation, electronic collision sensing and CENTURION code-hopping remote control.

The RDO II is designed for domestic roll-up garage doors where quiet operation, backup power and a compact side-mounted operator are important.

RDO II Roll-Up Operator
Centurion RDO II roll-up garage door motor
Designed specifically for roll-up doors The motor fits into the roll-up door system rather than using the ceiling-mounted rail layout associated with sectional-door operators.
Motor Voltage24V DC
Power SupplyBattery driven with mains charger
Opening Speed100–150mm/sec
Collision SensingElectronic obstruction detection
ReceiverCENTURION code-hopping, 433MHz
Where the RDO II Fits

A Dedicated Motor for Domestic Roll-Up Garage Doors

The RDO II is not a general-purpose sectional-door motor. It is intended for domestic roll-up garage doors and should be selected after the door size, balance and condition have been checked.

01
Roll-up garage doorsDesigned around the compact shaft-and-curtain operating layout used by domestic roll-up doors.
02
Homes affected by power interruptionsBattery-driven operation provides continued access when mains power is unavailable, subject to battery condition and available charge.
03
Quiet residential useThe 24V DC drive is designed for smooth, quiet operation in a home environment.
04
Doors that fit the RDO II operating envelopeManufacturer literature lists a maximum door size of up to 6m² with a maximum width of 2.8m; the actual door should still be assessed before installation.
Technical Specification

RDO II Technical Data

The values below are based on CENTURION manufacturer literature for the RDO II. Final installation suitability still depends on the actual roll-up door.

Centurion RDO II garage door motor and controller
Input voltage
220V AC ±10% @ 50Hz
Motor voltage
24V DC
Motor power supply
Battery driven
Opening speed
100–150mm/sec
Collision sensing
Electronic
Operating temperature
-15°C to +50°C
Protection rating
IP54
Receiver
CENTURION code-hopping onboard receiver · 433MHz
Battery capacity, receiver storage and certain controller details can differ across documentation or production revisions. Confirm the supplied unit specification when ordering.
Why Choose the RDO II?

Features That Matter in Everyday Roll-Up Door Use

01 / BACKUP POWER

Battery-Driven Operation

The RDO II is designed to continue operating when mains power is unavailable, subject to the condition and charge of the installed battery system.

02 / QUIET DRIVE

24V DC Motor

The high-torque DC drive is intended to provide smooth, quiet operation for domestic roll-up garage doors.

03 / SAFETY

Electronic Collision Sensing

The operator detects abnormal resistance during travel and can stop and reverse when an obstruction is encountered.

04 / SECURITY

Code-Hopping Receiver

CENTURION code-hopping technology changes the transmitted code to reduce the risk associated with simple fixed-code copying.

05 / CONVENIENCE

Auto-Close Capability

Auto-Close can be configured where the installation and safety equipment are suitable. Safety beams are strongly recommended.

06 / COMPACT FORMAT

Made for Roll-Up Doors

The operator is designed around the roll-up door system rather than requiring the long ceiling rail used by many sectional-door motors.

Power & Safety

Battery Backup Is Useful — Correct Door Setup Is Essential

A garage door motor should automate a door that already moves correctly. It should not be used to force a stiff, damaged or badly balanced roll-up door.

Power During Outages

The RDO II is battery driven and charged from the mains supply. That means normal operation can continue during a power interruption while usable battery capacity remains.

24V DC motor system Battery-driven operation Mains charger replenishes the battery Battery health affects backup performance

Safety Before Automation

The roll-up door should travel freely before the motor is installed. Safety beams are recommended where Auto-Close or automated closing is used.

Check curtain movement and guide alignment Inspect the shaft and spring system Confirm obstruction detection settings Use suitable safety beams where required
Compatible Access Options

Useful RDO II Accessories & Controls

The final accessory combination depends on how the garage is used and which functions are needed.

01Infrared Safety BeamsDetect an obstruction across the garage opening and are strongly recommended for automated closing.
02Wireless Wall SwitchProvides convenient wall-mounted control without running control wiring to the switch position.
03CENTURION TransmittersCode-hopping remote controls can be programmed to the RDO II receiver.
04External Manual OverrideProvides a way to release the garage door manually where the installation requires external access.
05Keypad AccessA compatible keypad can add coded access where remote-only operation is not convenient.
Professional Installation

How We Match an RDO II to the Roll-Up Door

01Inspect the existing doorCheck curtain condition, guides, shaft, springs, locks and general movement.
02Confirm suitabilityMeasure the roll-up door and confirm that the installed door is appropriate for the RDO II.
03Install & configureFit the operator, controller and required accessories, then configure travel and safety functions.
04Test the complete systemCheck opening, closing, obstruction response, remote controls and backup operation.
Related Garage Door Services

Motor Installation, Roll-Up Doors, Repairs & Maintenance

Installation Coverage

Centurion RDO II Installation Across Gauteng

Mobile RDO II supply, installation and support are available across the main Gauteng service regions. Send your suburb and a photo of the roll-up door so compatibility can be checked.

Johannesburgand surrounding areas
Pretoriaand surrounding areas
Centurionsuburbs and estates
Midrandand nearby areas
East Randsubject to availability
West Randand surrounding areas
Frequently Asked Questions

Centurion RDO II FAQs

What type of garage door is the Centurion RDO II designed for?

The RDO II is designed for domestic roll-up garage doors. The actual door should still be checked for size, balance, condition and compatibility before installation.

Does the RDO II work during a power outage?

Yes. The RDO II is battery driven and includes battery backup so the garage door can continue operating when mains power is unavailable, subject to battery condition and available charge.

What voltage motor does the RDO II use?

The RDO II uses a 24V DC motor.

Does the RDO II have obstruction detection?

Yes. The RDO II uses electronic collision sensing. If an obstruction is detected during closing, the system can stop and reverse. Safety beams are also recommended for automated garage doors.

What size roll-up door can the RDO II automate?

Manufacturer literature for the RDO II lists a maximum door size of up to 6 square metres with a maximum width of 2.8 metres. The actual door weight, balance and condition should still be assessed before installation.

Does the RDO II use secure remote controls?

Yes. CENTURION documentation lists a code-hopping onboard receiver operating at 433MHz.

Can the RDO II use Auto-Close?

Auto-Close can be configured where the installation and required safety equipment are suitable. Safety beams are strongly recommended for automated closing.

Do you install the RDO II across Gauteng?

Yes. The Garage Door Company provides mobile RDO II supply and installation across Johannesburg, Pretoria, Centurion, Midrand, the East Rand, West Rand and surrounding Gauteng areas, subject to current availability.

Need an RDO II for Your Roll-Up Garage Door?

Send us a photo of the door, the approximate opening size and your suburb. We can check whether the RDO II is suitable and assist with professional installation.